406-422-5223

Thermal Imaging

We See RED…InfrRED

ir_4625Infrared scanning (IR) is an advanced, non-invasive technology that allows the inspector to show clients things about their homes or buildings that can’t be revealed using conventional inspection methods.

We are the first to use infrared imaging in our area and we take pride in innovation. The “IR” services most inspectors advertise are really a gimmick rather than providing you with any real information about the condition of your home.

Infrared scanning (IR) of a home has become one of the latest and highly regarded tools in the home inspection process. IR scanning of the house is included with every property inspection we do. IR is also utilized in another of our service offerings ‘Blower Door Testing’.

When scanning a home we will be combining our visual inspection with the ability to spot heat differentials at surface areas ultimately or potentially inside the walls and ceiling that may require further evaluation during the inspection by your inspector or possibly post inspection by a qualified tradesperson. With our training, IR can identify unwanted moisture intrusions, leaks, excessive heat or cold areas and even over heating electrical.

 

Detecting missing or damaged insulation

An IR camera can quickly and non-destructively detect areas of missing, moisture-laden or otherwise damaged insulation in walls, crawlspaces and attics or around doors, windows, electrical outlets and other access plates. All of these problems can increase a building’s energy costs by allowing cold air to enter the building and heated air to escape in the winter and the reverse in the warmer, summer months. IR can also identify poorly insulated or uninsulated pipes, another source of costly heat loss.

 

Detecting faulty electrical-mechanical and HVAC systems and components

Infrared cameras are used to detect overloaded circuits, faulty wiring and loose electrical connections because they all generate heat. IR can detect thin spots in furnace heat exchangers and flues, mechanical problems such as worn, under-lubricated pumps, motors and bearings in fans, compressors and furnaces, electrical faults, refrigerant leaks and blockages in HVAC components.

 

Detecting leaking roofs

An infrared camera in the hands of a trained inspector can identify missing or moisture-soaked insulation under a flat roof membrane roof where the insulation needs replacement, permitting the surgical repair of failed areas rather than the more costly replacement of the entire roof.

 

Finding construction defects

ir_4176The increased use of EIFS (Exterior Insulation and Finish Systems) and stone, stucco, brick veneers and siding as facades on residential, as well as commercial, buildings invites the possibility of water intrusion if they are not properly installed. IR can detect or verify moisture infiltration in these weatherproofing ‘barrier’ systems, usually the result of insufficient detailing such as inadequate or improperly applied flashing or sealants. In addition, IR can monitor and track moisture migration paths within the wall cavity.

 

Limitations

IR covers so much more area and gets into many places not accessible to moisture meters, which require contact with the surface being inspected; it finds things that would never have been found with a moisture meter alone.

But there is still a role for moisture meters. Infrared, which can quickly locate the probable presence of moisture by identifying temperature variations as slight as +/- 0.25° F in building structures, can’t detect moisture per se or how much is present. For that, you still need a moisture meter to identify an abnormality you might see on an IR thermogram, and to confirm that the temperature differential you’re seeing is actually an indication of moisture and not something else, such as an insulation void or multiple layers of building material.

In addition, thermal imagers show all types of differences in temperatures. An air leak (infiltration) and water can look virtually the same in the infrared image. Moisture meters are the better instruments to make the final determination.

The combination of IR and moisture meters can mean little or no destructive testing is required, allowing for substantial
savings for the building owner, or homeowner or other responsible party.

Ready to schedule an appointment? Email Us!